FreeBSD 15.0-RELEASE aarch64 dvd1 CVEs

The ELF core dump code counted the number of dumpable VM map entries, allocated a buffer for the corresponding program headers, then iterated over the map a second time to populate them. A process sharing the address space via rfork(2) can mutate the map between the two passes, causing the second pass to write program headers past the end of the buffer. An unprivileged local user sharing an address space with a process that dumps core can trigger an out-of-bounds write on the kernel heap, potentially leading to privilege escalation.

The GETALL and SETALL commands in semctl(2) recorded the number of semaphores in the target set, dropped the lock protecting the set, allocated a buffer sized for that count, and reacquired the lock. A sequence-number check was used to verify that the set had not been replaced in the interim, but the sequence number wraps after 0x8000 create/destroy cycles. By rapidly destroying and recreating semaphore sets at the same index, another process can cause the sequence number to wrap, allowing a set with a different number of semaphores to pass validation. The subsequent copy then reads or writes past the end of the allocated buffer. An unprivileged local user can trigger out-of-bounds reads and writes on kernel heap memory, potentially leading to privilege escalation.

As an inadvertent side effect of an unrelated code change, PRIV_KTRACE was always denied to a jailed root user. Tracing configured by a jailed root user was therefore not flagged as privileged. An unprivileged user in a jail that has permission to debug the target process can modify the jailed root user's ktrace(2) flags, or disable tracing outright. A jailed root user therefore cannot reliably trace unprivileged processes.

After dispatching a decrypt operation to OCF and receiving the result, the wg(4) driver failed to check whether the MAC verification step succeeded. The driver thus silently accepted packets with an invalid Poly1305 authentication tag. A remote attacker who can send UDP packets to a WireGuard endpoint, and who can guess the bounds of the receiver's replay window, can inject forged or modified transport data packets into the tunnel. A remote attacker who can intercept WireGuard packets bound for a FreeBSD host can modify the ciphertext and authenticated data without detection by the receiver.

To retrieve the previous timer value, the kernel calls realtimer_gettime(), which obtains the current time for the timer's clock. For a timer using CLOCK_TAI this can fail when no TAI offset has been configured, but the error return was not checked, so the uninitialized output buffer was copied to userspace. An unprivileged local user can obtain uninitialized kernel stack memory by creating a POSIX timer with CLOCK_TAI and calling timer_settime(2), potentially disclosing sensitive kernel data.

The ISO-2022 encoding module used a stack buffer sized to MB_LEN_MAX (6 bytes) for intermediate character output. Some ISO-2022 variants can require up to 10 bytes per character, in which case conversions can trigger a stack buffer overflow of up to four bytes. An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules.

Several encoding modules, including HZ, UTF-7, VIQR, and ZW, did not properly check the size of the caller-supplied output buffer before writing converted characters. An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules.

The compat32 kevent() handler translates a 64-bit kevent struct into a stack- declared 32-bit struct. It did not first zero the stack struct. An unprivileged user may observe a small amount of uninitialized kernel stack data, which may contain sensitive information.

The Linux waitid() implementation translates a FreeBSD siginfo_t struct into a stack-declared Linux siginfo_t. It did not first zero the stack struct. An unprivileged user may observe 104 bytes of uninitialized kernel stack data, which may contain sensitive information.

When building the iovec array for a received TLS 1.2 CBC record, ktls_ocf_tls_cbc_decrypt() incremented the iovec index for every mbuf in the chain, including mbufs that were skipped because they contained only TLS header bytes. This left uninitialized entries in the iovec array. The iovec array was allocated without zeroing. A remote TLS peer can cause the kernel to read from uninitialized iovec entries during HMAC computation, resulting in a kernel panic. The peer must be able to control TCP segmentation such that the first mbuf of a CBC record contains only the 5-byte TLS record header.

The ZFS_IOC_SET_PROP ioctl, used by zfs-set(8), incorrectly validated the calling user such that an unprivileged user is able to set metadata on a dataset indicating that the dataset has received properties from a zfs-recv(8) stream. Any local user can set the internal ZFS metadata flag "$hasrecvd" on datasets via ZFS_IOC_SET_PROP.

The ZFS_IOC_RECV_NEW ioctl, in the heal receive path, similarly truncated a 64-bit payload size to a 32-bit integer for allocation, then used the original 64-bit size as the length for a byteswap operation. A local user with the "receive" delegated ZFS permission can trigger kernel memory corruption via ZFS_IOC_RECV_NEW by sending a crafted receive stream in heal mode.

The ZFS_IOC_USERSPACE_MANY ioctl, used by zfs-userspace(8), truncated a 64-bit output buffer size to a 32-bit integer for the kernel allocation, but used the original 64-bit size as the buffer limit when writing records. A local user with the "userused" delegated ZFS permission can trigger a kernel heap overflow via the ZFS_IOC_USERSPACE_MANY ioctl, potentially escalating privileges.

Certain system calls, such open(2) with the O_TRUNC flag set, and fspacectl(2), could incorrectly free memory in largepage objects. These operations are not permitted on largepage objects, but the implementation did not verify this. An unprivileged local user can abuse the bug to access freed kernel memory. This can be exploited to escalate privileges.

Pages belonging to largepage shared memory objects were not explicitly wired. When sendfile(2) transmitted such an object with the SF_NOCACHE flag, it freed the underlying pages after transmission even though existing mappings still referred to them. An unprivileged local user can abuse the bug to access freed kernel memory. This can be exploited to escalate privileges.

When auditing a system call executed via ptrace(PT_SC_REMOTE), the kernel passed the return value of an internal setup function to AUDIT_SYSCALL_EXIT() rather than the actual result of the executed system call. As a result, committed audit records for system calls which returned an error do not reflect the true outcome of the operation. That is, they indicate that the operation succeeded when it in fact failed. Audit records for system calls executed via ptrace(PT_SC_REMOTE) may show an incorrect error status. An attacker with the ability to debug a process could use this to produce misleading audit trails, potentially undermining audit-based Intrusion Detection Systems (IDS).

The RACK setsockopt(2) handler drops the connection lock in order to copy option data from userspace, then reacquires the lock. After reacquiring, it verifies that the TCP stack had not been switched away, but did not reload its pointer to the stack's per-connection control block. If userspace switches stacks twice during this window, the check will succeed but the saved pointer will refer to freed memory. The bug may be exploitable by an unprivileged local user to escalate privileges.

The kernel function that implements unlinkat(2) and funlinkat(2) validated the AT_RESOLVE_BENEATH flag but failed to pass it through to the underlying path lookup. The flag was silently dropped, so path resolution was not actually restricted. A process that uses AT_RESOLVE_BENEATH with unlinkat(2) or funlinkat(2) to confine path resolution can in fact resolve paths above the starting directory. A caller relying on this flag for path containment may delete files outside the intended directory tree.

The RTSP handler in libalias rewrote outgoing packets into a fixed-length stack buffer without checking whether the rewritten data fit in the buffer, or whether the result fit back in the original packet. A host sending crafted RTSP traffic from inside a NAT gateway using libalias can overflow a stack buffer, potentially achieving remote code execution in the kernel (when using ipfw(4) NAT) or in the natd(8) process (which generally runs as the root user).

When the JAIL_AT_DESC flag is specified, kern_jail_set() and kern_jail_get() released the reference to the caller's current prison before looking up the jail descriptor. If the descriptor lookup failed, error-handling paths released the same reference a second time. An unprivileged local user can trigger a prison reference count underflow, which may cause the prison structure to be freed while still in use. When this is done on the jail host, the bug will generally result in an immediate panic. However, if the user is running in a jail, then it may be possible to exploit the bug to elevate privileges.

When msync(MS_INVALIDATE) is called on a mapping of an unmanaged device object, the physical pages in the mapping range are marked invalid but remain in the pager's page list. A subsequent page fault will cause the fault handler to re-insert the page into the object's list. This corrupts the list, and on object destruction the page is freed twice. An unprivileged local user with access to a device that provides memory-mapped I/O can trigger a use-after-free in the kernel, though this is limited to a pool of objects ("fictitious pages") that are never recycled for a different purpose. It may be possible to exploit this to escalate privileges.

During execve(2) of a SUID binary, the new virtual address space is installed before the process credentials are updated. During this window, a process running as the same user can access the target process's memory via procfs or linprocfs, because the kernel's debugging permission check still saw the original credentials. An unprivileged local user can exploit this race to modify the address space of a SUID binary before its credentials are elevated, potentially gaining full control of the affected system.

The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation. An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges.

The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen. An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier.

Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).

The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so AT_SECURE was incorrectly set to zero for set-user-ID and set-group-ID executables. An unprivileged local user can inject a shared library via LD_PRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary.

The kernel handler for IPV6_MSFILTER dropped a serializing lock in order to copy the source-filter list from userspace, then reacquired the lock. During this window another thread could free the multicast filter structure, leaving the handler with a stale pointer to freed memory. An unprivileged local user can exploit this use-after-free to escalate privileges.

sigqueue(2) was marked as permitted in capability mode with the introduction of Capsicum in 2011, but the implementation of kern_sigqueue did not include a capability mode check restricting signal delivery to the calling process's own PID. A process in capability mode can use sigqueue(2) to send signals to any process it could signal following standard Unix permissions, bypassing the Capsicum sandbox restriction. A compromised sandboxed process could interfere with other processes, for example by sending SIGKILL or SIGSTOP. This could be any process running as the same user, or any process, for a superuser sandboxed process.

dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).

The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data. An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.

When used to deliver a signal to a specific thread, thr_kill2(2) called p_cansignal() to determine whether the operation was permitted but did not check the result before delivering the signal. The signal was sent even when the permission check failed. The system call returned the resulting error to the caller, but by then the signal had already been delivered. The missing check allows an unprivileged local user who knows or can guess a target's process and thread IDs to send any signal to a process they would not normally be permitted to signal, including processes owned by other users or by root. The same check enforces jail boundaries, so a jailed process can signal processes on the host or in other jails. Thread IDs are allocated globally and sequentially, and so can be discovered by brute force with no visibility into the target. An attacker can stop or terminate arbitrary processes, including critical system daemons, resulting in a Denial of Service (DoS).

When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) to prompt the user to select a network. This is implemented using a shell script, and the code which handled network names was not careful to prevent expansion by the shell. As a result, a suitably crafted network name can be used to execute commands via a subshell. The problem can be exploited to execute code as root on the system running bsdinstall or bsdconfig. The attacker would need to create an access point with a specially crafted name and be within range of a Wi-Fi scan. Note that bsdinstall and bsdconfig are vulnerable as soon as the user prompts them to scan for nearby networks; they do not need to actually select the malicious network.

In the case of the cap_net service, when a key present in the old limit was omitted from the new limit, the missing key was treated as "allow any" instead of being rejected. In certain scenarios, an application that had previously restricted a subset of network operations could ask for a new limit that extended the permissions of the process.

ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges. The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system.

When a fusefs file system implements extended attributes, the kernel may send a FUSE_LISTXATTR message to the userspace daemon to retrieve the list of extended attributes for a given file. The FUSE protocol requires the daemon to return a packed list of NUL-terminated strings. The fusefs kernel module calls strlen() on this daemon-supplied buffer without first verifying that the entire list is NUL-terminated. If a malicious daemon sends a non-NUL-terminated list, the fusefs kernel module may read beyond the end of one heap-allocated buffer and potentially write beyond the end of a second buffer. A malicious daemon could disclose up to 253 bytes of kernel heap memory, or it could inject up to 250 attacker-controlled bytes into unallocated kernel heap space.

A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object. In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability. The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges.

libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024). An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges.

The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs. Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.

As dhclient is building an environment to pass to dhclient-script, it may need to resize the array of string pointers. The code which expands the array incorrectly calculates its new size when requesting memory, resulting in a heap buffer overrun. A specially crafted packet can cause dhclient to overrun its buffer of environment entries. This can result in a crash, but it may be possible to leverage this bug to achieve remote code execution.

When exchanging data over a socket, libnv uses select(2) to wait for data to arrive. However, it does not verify whether the provided socket descriptor fits in select(2)'s file descriptor set size limit of FD_SETSIZE (1024). An attacker who is able to force a libnv application to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, can trigger stack corruption. If the target application is setuid-root, then this could be used to elevate local privileges.

When processing the header of an incoming message, libnv failed to properly validate the message size. The lack of validation allows a malicious program to write outside the bounds of a heap allocation. This can trigger a crash or system panic, and it may be possible for an unprivileged user to exploit the bug to elevate their privileges.

Incorrect packet validation allowed unbounded recursion parsing SCTP chunk parameters. This can eventually result in a stack overflow and panic. Remote attackers can craft packets which cause affected systems to panic. This affects any system where pf is configured to process traffic, independent of the configured ruleset.

An operator precedence bug in the kernel results in a scenario where a buffer overflow causes attacker-controlled data to overwrite adjacent execve(2) argument buffers. The bug may be exploitable by an unprivileged user to obtain superuser privileges.

The BOOTP file field is written to the lease file without escaping embedded double-quotes, allowing injection of arbitrary dhclient.conf directives. When the lease file is subsequently re-parsed by dhclient, e.g., after a system restart, an attacker-controlled field from the lease is passed to dhclient-script(8), which evaluates it. A rogue DHCP server may be able to execute arbirary code as root on a system running dhclient.

In order to apply a particular protection key to an address range, the kernel must update the corresponding page table entries. The subroutine which handled this failed to take into account the presence of 1GB largepage mappings created using the shm_create_largepage(3) interface. In particular, it would always treat a page directory page entry as pointing to another page table page. The bug can be abused by an unprivileged user to cause pmap_pkru_update_range() to treat userspace memory as a page table page, and thus overwrite memory to which the application would otherwise not have access.

The implementation of TIOCNOTTY failed to clear a back-pointer from the structure representing the controlling terminal to the calling process' session. If the invoking process then exits, the terminal structure may end up containing a pointer to freed memory. A malicious process can abuse the dangling pointer to grant itself root privileges.

A regression in the way hashes were calculated caused rules containing the address range syntax (x.x.x.x - y.y.y.y) that only differ in the address range(s) involved to be silently dropped as duplicates. Only the first of such rules is actually loaded into pf. Ranges expressed using the address[/mask-bits] syntax were not affected. Some keywords representing actions taken on a packet-matching rule, such as 'log', 'return tll', or 'dnpipe', may suffer from the same issue. It is unlikely that users have such configurations, as these rules would always be redundant. Affected rules are silently ignored, which can lead to unexpected behaviour including over- and underblocking.

Each RPCSEC_GSS data packet is validated by a routine which checks a signature in the packet. This routine copies a portion of the packet into a stack buffer, but fails to ensure that the buffer is sufficiently large, and a malicious client can trigger a stack overflow. Notably, this does not require the client to authenticate itself first. As kgssapi.ko's RPCSEC_GSS implementation is vulnerable, remote code execution in the kernel is possible by an authenticated user that is able to send packets to the kernel's NFS server while kgssapi.ko is loaded into the kernel. In userspace, applications which have librpcgss_sec loaded and run an RPC server are vulnerable to remote code execution from any client able to send it packets. We are not aware of any such applications in the FreeBSD base system.

On a system exposing an NVMe/TCP target, a remote client can trigger a kernel panic by sending a CONNECT command for an I/O queue with a bogus or stale CNTLID. An attacker with network access to the NVMe/TCP target can trigger an unauthenticated Denial of Service condition on the affected machine.

When a challenge ACK is to be sent tcp_respond() constructs and sends the challenge ACK and consumes the mbuf that is passed in. When no challenge ACK should be sent the function returns and leaks the mbuf. If an attacker is either on path with an established TCP connection, or can themselves establish a TCP connection, to an affected FreeBSD machine, they can easily craft and send packets which meet the challenge ACK criteria and cause the FreeBSD host to leak an mbuf for each crafted packet in excess of the configured rate limit settings i.e. with default settings, crafted packets in excess of the first 5 sent within a 1s period will leak an mbuf. Technically, off-path attackers can also exploit this problem by guessing the IP addresses, TCP port numbers and in some cases the sequence numbers of established connections and spoofing packets towards a FreeBSD machine, but this is harder to do effectively.

The rtsock_msg_buffer() function serializes routing information into a buffer. As a part of this, it copies sockaddr structures into a sockaddr_storage structure on the stack. It assumes that the source sockaddr length field had already been validated, but this is not necessarily the case, and it's possible for a malicious userspace program to craft a request which triggers a 127-byte overflow. In practice, this overflow immediately overwrites the canary for the rtsock_msg_buffer() stack frame, resulting in a panic once the function returns. The bug allows an unprivileged user to crash the kernel by triggering a stack buffer overflow in rtsock_msg_buffer(). In particular, the overflow will corrupt a stack canary value that is verified when the function returns; this mitigates the impact of the stack overflow by triggering a kernel panic. Other kernel bugs may exist which allow userspace to find the canary value and thus defeat the mitigation, at which point local privilege escalation may be possible.

Due to a programming error, blocklistd leaks a socket descriptor for each adverse event report it receives. Once a certain number of leaked sockets is reached, blocklistd becomes unable to run the helper script: a child process is forked, but this child dereferences a null pointer and crashes before it is able to exec the helper. At this point, blocklistd still records adverse events but is unable to block new addresses or unblock addresses whose database entries have expired. Once a second, much higher number of leaked sockets is reached, blocklistd becomes unable to receive new adverse event reports. An attacker may take advantage of this by triggering a large number of adverse events from sacrificial IP addresses to effectively disable blocklistd before launching an attack. Even in the absence of attacks or probes by would-be attackers, adverse events will occur regularly in the course of normal operations, and blocklistd will gradually run out file descriptors and become ineffective. The accumulation of open sockets may have knock-on effects on other parts of the system, resulting in a general slowdown until blocklistd is restarted.

The rtsol(8) and rtsold(8) programs do not validate the domain search list options provided in router advertisement messages; the option body is passed to resolvconf(8) unmodified. resolvconf(8) is a shell script which does not validate its input. A lack of quoting meant that shell commands pass as input to resolvconf(8) may be executed.

grub2-bhyve, as used in FreeBSD bhyve before revision 525916 2020-02-12, mishandles font loading by a guest through a grub2.cfg file, leading to a buffer overflow.

grub2-bhyve, as used in FreeBSD bhyve before revision 525916 2020-02-12, does not validate the address provided as part of a memrw command (read_* or write_*) by a guest through a grub2.cfg file. This allows an untrusted guest to perform arbitrary read or write operations in the context of the grub-bhyve process, resulting in code execution as root on the host OS.

The NVIDIA GPU driver for FreeBSD R352 before 352.09, 346 before 346.72, R349 before 349.16, R343 before 343.36, R340 before 340.76, R337 before 337.25, R334 before 334.21, R331 before 331.113, and R304 before 304.125 allows local users with certain permissions to read or write arbitrary kernel memory via unspecified vectors that trigger an untrusted pointer dereference.

The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in FreeBSD, NetBSD, and possibly other BSD-based operating systems allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, a similar vulnerability to CVE-2010-4670.

The LZW decompressor in (1) the BufCompressedFill function in fontfile/decompress.c in X.Org libXfont before 1.4.4 and (2) compress/compress.c in 4.3BSD, as used in zopen.c in OpenBSD before 3.8, FreeBSD, NetBSD 4.0.x and 5.0.x before 5.0.3 and 5.1.x before 5.1.1, FreeType 2.1.9, and other products, does not properly handle code words that are absent from the decompression table when encountered, which allows context-dependent attackers to trigger an infinite loop or a heap-based buffer overflow, and possibly execute arbitrary code, via a crafted compressed stream, a related issue to CVE-2006-1168 and CVE-2011-2896.

mount.vmhgfs in the VMware Host Guest File System (HGFS) in VMware Workstation 7.1.x before 7.1.4, VMware Player 3.1.x before 3.1.4, VMware Fusion 3.1.x before 3.1.3, VMware ESXi 3.5 through 4.1, and VMware ESX 3.0.3 through 4.1, when a Solaris or FreeBSD guest OS is used, allows guest OS users to modify arbitrary guest OS files via unspecified vectors, related to a "procedural error."

Stack consumption vulnerability in the fnmatch implementation in apr_fnmatch.c in the Apache Portable Runtime (APR) library before 1.4.3 and the Apache HTTP Server before 2.2.18, and in fnmatch.c in libc in NetBSD 5.1, OpenBSD 4.8, FreeBSD, Apple Mac OS X 10.6, Oracle Solaris 10, and Android, allows context-dependent attackers to cause a denial of service (CPU and memory consumption) via *? sequences in the first argument, as demonstrated by attacks against mod_autoindex in httpd.

crontab.c in crontab in FreeBSD allows local users to determine the existence of arbitrary directories via a command-line argument composed of a directory name concatenated with a directory traversal sequence that leads to the /etc/crontab pathname.

crontab.c in crontab in FreeBSD and Apple Mac OS X allows local users to (1) determine the existence of arbitrary files via a symlink attack on a /tmp/crontab.XXXXXXXXXX temporary file and (2) perform MD5 checksum comparisons on arbitrary pairs of files via two symlink attacks on /tmp/crontab.XXXXXXXXXX temporary files.

Balabit syslog-ng 2.0, 3.0, 3.1, 3.2 OSE and PE, when running on FreeBSD or HP-UX, does not properly perform cast operations, which causes syslog-ng to use a default value of -1 to create log files with insecure permissions (07777), which allows local users to read and write to these log files.

Multiple integer signedness errors in smb_subr.c in the netsmb module in the kernel in NetBSD 5.0.2 and earlier, FreeBSD, and Apple Mac OS X allow local users to cause a denial of service (panic) via a negative size value in a /dev/nsmb ioctl operation, as demonstrated by a (1) SMBIOC_LOOKUP or (2) SMBIOC_OPENSESSION ioctl call.

The Coda filesystem kernel module, as used in NetBSD and FreeBSD, when Coda is loaded and Venus is running with /coda mounted, allows local users to read sensitive heap memory via a large out_size value in a ViceIoctl struct to a Coda ioctl, which triggers a buffer over-read.

The NET_TCP_LISTEN function in net.c in Zabbix Agent before 1.6.7, when running on FreeBSD or Solaris, allows remote attackers to bypass the EnableRemoteCommands setting and execute arbitrary commands via shell metacharacters in the argument to net.tcp.listen. NOTE: this attack is limited to attacks from trusted IP addresses.

Opera before 10.00 on Linux, Solaris, and FreeBSD does not properly implement the "INPUT TYPE=file" functionality, which allows remote attackers to trick a user into uploading an unintended file via vectors involving a "dropped file."

Format string vulnerability in Wireshark 0.99.8 through 1.0.5 on non-Windows platforms allows local users to cause a denial of service (application crash) via format string specifiers in the HOME environment variable.

The mld_input function in sys/netinet6/mld6.c in the kernel in NetBSD 4.0, FreeBSD, and KAME, when INET6 is enabled, allows remote attackers to cause a denial of service (divide-by-zero error and panic) via a malformed ICMPv6 Multicast Listener Discovery (MLD) query with a certain Maximum Response Delay value.

Stack-based buffer overflow in NConvert 4.92, GFL SDK 2.82, and XnView 1.93.6 on Windows and 1.70 on Linux and FreeBSD allows user-assisted remote attackers to execute arbitrary code via a crafted format keyword in a Sun TAAC file.

The ULE process scheduler in the FreeBSD kernel gives preference to "interactive" processes that perform voluntary sleeps, which allows local users to cause a denial of service (CPU consumption), as described in "Secretly Monopolizing the CPU Without Superuser Privileges."

The 4BSD process scheduler in the FreeBSD kernel performs scheduling based on CPU billing gathered from periodic process sampling ticks, which allows local users to cause a denial of service (CPU consumption) by performing voluntary nanosecond sleeps that result in the process not being active during a clock interrupt, as described in "Secretly Monopolizing the CPU Without Superuser Privileges."

The Linux kernel before 2.6.16.9 and the FreeBSD kernel, when running on AMD64 and other 7th and 8th generation AuthenticAMD processors, only save/restore the FOP, FIP, and FDP x87 registers in FXSAVE/FXRSTOR when an exception is pending, which allows one process to determine portions of the state of floating point instructions of other processes, which can be leveraged to obtain sensitive information such as cryptographic keys. NOTE: this is the documented behavior of AMD64 processors, but it is inconsistent with Intel processors in a security-relevant fashion that was not addressed by the kernels.